Dredge Suction & Discharge Hose

PRODUCT DESCRIPTION
PERFORMANCE:
The hoses are used for silt/gravels conveyance with Dredgers. The suitable working temperature is from -20 Celsius degrees to 80 Celsius degrees. It is convenient to install, flexible to use, safe, abrasion-resistant and bending-resistant.
1. ID: 152-1300mm
2. OD: 182-1350mm or more.
3. Working pressure: 5-25bar
4. Burst pressure: 10-75bar
5. Vacuum pressure: 0.8bar
6. Length: 1-6m
7. Internal rubber layer: NR, SBR, BR
8. Reinforcement layer: Steel wire spiral reinforced layer.
9. External rubber layer: NR, SBR, BR
10. Flange: Chinese standard, American standard, Japanese standard, German standard etc. Are available.
11. Application: Used for port, dock, seawater, silt, sand, discharge flood etc.
12. Character: Flexible, Anti-waves, Wear-resistance, Weather-resistance, Aging-resistance, seawater resistance
13. Temperature: From -30 Degrees Celsius To 80 Degrees Celsius.
14. Guarantee period: 6 months or longer
Note: Above text contained is provided for general reference purposes only.
Products can be manufactured according to customers' requirements and Drawings.
Inside Diameter
(mm----inch)
Outside Diameter
  (mm----inch)
Working Pressure
 (Mpa----bar)
Burst Pressure
( Mpa----bar)
Vacuum Pressure
( Kpa----bar)
Length
( m)
152----6"
182-----7-1/4"
1.2-----12
2.4----24
80----0.8
20
203----8"
233----9-1/5"
1.2-----2.4
2.4----24
80----0.8
20
254----10"
284----11-1/5"
1-----10
2----20
80----0.8
10
304----12"
340----13-2/5"
1-----10
2----20
80----0.8
6-10
350----14"
390----15-2/5"
1-----10
2----20
80----0.8
6-10
450----18"
486----19-1/5"
0.7-----7
1.5----15
80----0.8
6-10
550-----22"
590----23-3/5"
0.7-----7
1.5----15
80----0.8
6-10
600----24"
640----25-3/5"
0.7-----7
1.5----15
80----0.8
6-10
700----28"
750----29-3/5"
0.7-----7
1.5----15
80----0.8
6-10
800----32"
850----33-1/2"
0.5-----5
1----10
80----0.8
6-10
1000----40"
1050----41-1/2"
0.5-----5
1----10
80----0.8
6
1200----48"
1250----49-1/5"
0.5-----5
1----10
80----0.8
6
1300----52"
1350----53-1/5"
0.5-----5
1----10
80----0.8
6



评论

发表评论

此博客中的热门博文

hammer union Fig 100

图片
PRODUCT DESCRIPTION 1,000 psi cold working pressure Recommended service: Manifold and line connections Features: • Pressure-tight make-up with hammer • Economical low-pressure union A: precision sealing surface binding guarantees reliable pressure seal. B: recommended the use of low pressure manifold and the work pressure is not more than 1000Psi. B: type 100 Hammer union, 1000PSI NSCWP, the test pressure 1500PSI black nuts, yellow parts. Product specifications and basic parameters Nominal pipe size Total length Nut radius Material  Weight in mm in mm in mm nut subs lbs kgs 2 50.8 35/8 92.1 215/16 74.6 SC/SF SF 5.25 2.4 21/2 63.8 41/4 108.0 35/8 92.1 SC/SF SF 8.0 3.6 3 76.2 415/16 125.4 41/16 103.2 SC/SF SF 14.0 6.4 4 101.6 515/16 150.8 425/32 121.4 SC/SF SF 23.0 10.4 6 152.4 65, /8 168.3 67/16 163.5 SC/SF SF 44.5 20.2 8 ...
阅读全文

Gas Drainage inflatable Packer

图片
PRODUCT DESCRIPTION Structure: Consists of high pressure expansion hoses, middle steel pipe, sliding sealing coupling and pressure injection coupling. Application: Water injection at coal seam, gas suction and discharge. Technical Parameter: 1. Diameter: 60~150mm(can be customized) 2. Working pressure: 1~6Mpa(can be customized) 3. Operating speed of fluid: 5-8 tons per hour, the amount of gas depending on concentration and pressure. 4. Expansion index: 60~100% Functions: 1. Water injects into the coal seam and releases partial gas, effectively reduces the amount of gas at coal seam. 2. Once the effect of water injection is reached, it can reduce over 80% of dust power and improve working atmosphere, protect from dust explosion. 3. It can moist coal seam and protect coal from self-flaming. 4. Once the system of suction and discharge drilling hole is adopted, the amount of gas and drilling cuttings could be obviously increased, effectively releases gas pressu...
阅读全文

hammer union fig 50

图片
PRODUCT DESCRIPTION Hammer union importing international advanced technology, is forged with high-strength alloy steel, strict heat treatment process can ensure that the union have uniform metallurgical structure and pressing ability and the material meets ASTM and AISI Standard and the technology indexes conform to API Spec 6A, the product adopts some end connections of pipeline thread, tubing thread, butt-weld and compress-seal. The type mainly consists of: fig100, fig200, fig206, fig207,fig400, fig602, fig1002, fig1003, fig1502. Fig 50. Orange Nut - Orange Subs These low pressure and suction union of Fig-50 are made from carbon steel. The nut and O-ring are common in both sizes. Available in 4" or 5" sizes in threaded & socket welded connection. These unions are suitable for 500 PSI wp. Nominal pipe size Total length Nut radius Material Weight in mm in mm in mm nut subs lbs kgs 5 127 5 1/2 139.7 5 1/4 133.35 CF SF...
阅读全文